[bhsmith50]

Thanks! Will call today.

[bhsmith50]

Thanks to Basscat Service, everything is working great again.

[bhsmith50]

Made my own for my 2008 Pantera Classic using .25 inch plywood covered by indoor/outdoor carpet attached with carpet tape and hot glue. The front piece is 2 pieces of plywood attached at the top to a piece of 3/4″ stock 1.5″ wide. Drill holes sized to accept golf bag tubes then offset the front one a little toward the inside of the boat because the hull curves in up front. The back one is just the .25″ plywood attached with screws at top and a spacer at bottom to hold it away from back wall of rod box. The rubber grommets for the rear part are available online or maybe from BCB. Carefully measure and pattern both as the reverse of the left side box. Mine works and looks great.

[bhsmith50]

If your seats are similar to 2008 Classic then you can work your hand between the seat cushion and back rest and the seat will swing up. You can then see the hinges and screws holding the part you sit on in place.

[bhsmith50]

Obviously Ive got different seats, Ill bow out and let the pros take care of this.

[bhsmith50]

Thanks for the info, Ill be checking it out Mon or Tues.

[bhsmith50]

Thanks to all, especially JEH in LA, trim gauge indicates correctly after a minor adjustment to potentiometer. Took 5 min.

[bhsmith50]

Heres a video of a guy using live bait on drop shot rigs on multiple rods while strolling with the trolling motor. Im not going to bore any holes in my Basscat deck but you could make a multiple rod setup out of plywood or other material. You could also use artificial instead of live bait and fish the same way. Very effective under bridges in summertime they say.

[bhsmith50]

Heres the link to that video:

[bhsmith50]

I see Yuku doesnt like links in any form, pasted or typed. You can find the video by going to the Southwest Outdoors Report site and looking through that.

[bhsmith50]

Ive also noticed the spark when plugging in, does disconnecting the trolling motor stop that,

[bhsmith50]

Gotcha!

[bhsmith50]

Hey. Push some of that stuff down toward San Antonio. It wont hurt Choke Canyon or Canyon Lake.

[bhsmith50]

On my 3rd bassboat, 2008 classic now, 32 yrs of loading/unloading and never heard of a problem exactly like yours. Never fear, someone will be on shortly to tell you what you need to do. Im wondering if you have a roller missing or misplaced. Good luck and welcome.

[bhsmith50]

Im also looking for a flipping deck for my boat, 2008 Pantera Classic.

[Author]

Posts