[deadwingduck]

Thank you for the help. I’m sorry I didn’t see your post until two days ago. I’m still having issues with still not having power upfront. I’m having problems trying to figure out what repairs was done on the wiring. The problem I’m having is the white and black wire that’s supposed to be for the anchor light. It has power to it upfront all the time. I figured it should only have power if the switch was on.

[deadwingduck]

I only have it connected to the control panel. If I unplug from the control panel. It doesn’t so it. I’m also having issues with the ground. Yesterday all of a sudden the recirculating pump turn on. I have the ground for pin number 3 cut. So I disconnected that ground. The recirculating pump turned off but the fill pump turned on when the ground was disconnected. The previous owner redid a bunch of the wiring but it looks like maybe just the connections. What are the odds the panel is bad and is causing these issues? The panel is the bp101

[deadwingduck]

It would run 68-70 with the Tempest 23p. I added the equipment and had the prop checked out while I was having the equipment installed. The foot had the insides replaced. Now I’m turning about the same rpms but around 10mph slower.

[Author]

Posts