[Chris Iliohan]

Hello Kent how does the cutting board stay in place? Thanks ChrisWhile his is wedged in, you can place screws into it through the top lip or deck and side petitions. BCB

[Chris Iliohan]

Certainty tomorrow will not come fast enough for you. You have definitely made the right choice of boat. To post pictures you have to have your picture hosted with a web site like photobucket. After you have posted your picture there will be some letter and numbers asigned to your picture copy and paste the httpaddress for your picture. Next Under the Comment section when you are posting your message you will see a list image. link. email. ect. tabs. (located to the left of the screen)Click the image tab and paste you picture address. Also you can post your picture on the owners gallery . Cheers Chris

[Chris Iliohan]

It does happen to me (Sabre) what I do now is take a step back and that seems to help. Chris

[Chris Iliohan]

Not sure about not drilling holes however mine is mounted on the c channel underneath the fender (2 holes drilled on one lip of the channel) the tie downs I have seen at basspro. Boat buckle brand. Their is a 1 year warranty if that applies to you . Chris

[Chris Iliohan]

Milt My boat is running the same as yours I dont have a jp I also havent learned to drive the chinewalk. Too excited to wet the line than drive the boat long enough to teach myself 07 Sabre 150 opti. Chris

[Chris Iliohan]

Thank guys thatsalot better than a new t/m Ill let him know

[Chris Iliohan]

If it has the two bolts that hold the caliper on just remove them and tie that part off. If you undo the brake line you will have to bleed the system. VERY INPORTANT when you put the two bolts back in you must use 242 lock tite (the blue color) hope this helpsLast edited by hookminthelips on November 10th, 2007, 10:30 pm, edited 1 time in total.

[Chris Iliohan]

Not sure if you have a mercury but part # from them is 10-67755-1

[Chris Iliohan]

I think it is a 100 bucks for every year gone by after registration.

[Chris Iliohan]

fishboy1 Im from Barrie Ont. if that helps any Chris ..

[Chris Iliohan]

Friend lost just the seat part out of the pole (not Basscat) hit the windsheild and smashed it. Almost hit me .After that trip I always remove mine when running

[Chris Iliohan]

The trim down sound is more of a deeper pitch almost like that the motor has no oil even before it hits the trim rods when it hits the rods becomes even louder. Is the motor supposed to have oil ? the motor on the left looking from the back of boat has a yellow cap the motor making all the noise has not yellow cap? Just trying to find out if I should haulr in to the dealer or if this is quite normal. Obviously this is my first motor with trim.Thanks Guys definiatly will keep those rod ends greased.Chris

[Chris Iliohan]

basscat 35 I fish simcoe weekly 10 min drive to the ramp email me [url=mailto:[email protected]][email protected][/url] if you are going to fish I will be able to help some. Chris

[Chris Iliohan]

The post would be nice I just can bring myself to weld on the trailer and ruin the paint job just yet. Thanks for the comments. Winter has come early. Hey Judd we can change houses from November to March Chris

[Chris Iliohan]

A slight turn counter clockwise will free up the antenna this will then give you acess to the mounting plate

[Author]

Posts