[sdfd504]

If it is like most other decals, I would mix one or two drops of Dawn soap into a spray bottle full of water and it should work great. That is what I always was told to use by the sign makers that I know. Just allow it to dry good before you try to peel the top protector of the sticker off if there is one.

[sdfd504]

Yeah it is the same thing as the boat numbers on your boat. Just use the soap and water technique and you will be set.

[sdfd504]

Well I have to say that the ordering process was hard because there are so many options that you can choose from. Reed at Riverside Marine was very helpful during the process today and I cant wait to get the boats in several weeks. It is pretty much loaded with everything you can get so it should be an awesome ride to be in. I have to give some special thanks to Rick Pierce for all the help that he has given me over the past month. I have never gotten such great service from a boat company and I dont know of another boat manufacture that I can email the owner and get such quick replies back. I see now why it is like joining a family. I had one small problem early when I started looking at the boats and I was assured that if I was to look at them again that I would get the service that Basscat is known for and he was correct. The guys at Riverside Marine really took care of me during the whole ordering process and they treated me like family. Last edited by sdfd504 on April 13th, 2008, 12:15 am, edited 1 time in total.

[sdfd504]

I was just going to make sure before the boat goes into production.

[sdfd504]

OK I will take your word on it Travis. lol

[sdfd504]

I am in line with you as well. I ordered my new PII on Saturday and I cant wait to get it.

[sdfd504]

Congrats on getting the new Sabre. It is a great looking boat and I know you will get a lot of enjoyment out of it.

[sdfd504]

Sounds like it will be a good prop after all. I was wanting to get one on my PII but I dont know if I would need a 26 or a 25 on it? Did you find that you needed to go down a size with the Fury or could you turn a 27 if they made it?

[sdfd504]

Nope mine hasnt been posted yet.

[sdfd504]

http://www.threeriversmarine.com is the best place to order them from. You need to call to get the special pricing as they cant advertise their price on the net.

[sdfd504]

You will need either a 6″ or 8″ drop depending on the tires and if it is a 4×4 or not. We have a 4×4 on stock 17″ rims and I am going to get a 6″ drop and it should be about perfect.

[sdfd504]

http://www.threeriversmarine.com They will be able to get you what you need at a great price.

[sdfd504]

The PII will require almost a 22 deep garage with the swing away tongue. I cant remember what the Sabre is though.Last edited by sdfd504 on April 28th, 2008, 2:18 am, edited 1 time in total.

[sdfd504]

You can still get a dual axle trailer, you just need to order it with the pop axle option. I ordered it on ours and it was under $200 for the option and it still gives you the advantage of having a dual axle trailer on the road and a single axle if you need to move it in the garage.

[sdfd504]

Great looking Cat and glad that the wait is finally over for you. You will get lots of compliments on that boat.

[Author]

Posts