Owner's Board

shermsmarine

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #449104

    shermsmarine
    Participant

    It depends on your cover plate.. I & BCB normally use a 61/2″ dia. plate and mounting holes are 51/2″ pattern so you cut a 41/2″ hole. I use a 41/2″ hole saw so I get a nice round even hole.

    #465371

    shermsmarine
    Participant

    Greg It’s Ok new motor with only 15 min run time it’s excess DFI oil from the dealer doing the oil pump prime and being in break in mode using double to oil for the first 2 hours that is controlled by the PCM. The excess oil is running down the exhaust and out the drain hole for the shift shaft. If they winterized it also that would be even more oil draining down thru the exhaust…

    #465994

    shermsmarine
    Participant

    I have 2 pre owned PII’s you might want to take a look at.. http://www.shermsmarine.com

    #469631

    shermsmarine
    Participant

    That 24 P Fury 3 is the best prop I’ve found for your set up.. I tried a 25p Fury and it didn’t perform near as well overall as the 24.. You need to remember your going to be able to spin more RPM’s (6200) with that new beast and your going to love it!!

    #488659

    shermsmarine
    Participant

    I’m not going to say that published MSRP is a bad idea at all but BCB has never posted a MSRP on any boats other than special packages such as this years Cougar FTD SP at a national advertised package price. Prices do vary dealer to dealer depending on freight costs and several other factors. The other thing is BCB is a custom boat and the options available on most is nearly endless today.. For most it’s getting all the bells n whistles they can and still fit in their budget. Last on the MSRP.. Like Vehicles not many if anyone pays MSRP for a car or truck there’s about always discounts of some sort.. I as most dealers would be happy to give you some ballpark numbers but the ballpark is really big!  What I ask most to do that contact me is email me their “wish list” of options & equipment they would want, need or like and we go from there to get a realistic price on their dream boat..

    #675849

    shermsmarine
    Participant

    Ben Your boat is not a premium model it’s a Sabre FTD Advantage and BCB doesn’t install crank batteries in them and I have been installing the Interstate 31MHD in them for many years with very minimal issues at all going back to way before BCB started installing the Pro Guide. Yes it still has warranty and any Interstate dealer should be able to replace it if needed. The Interstate is much easier to find dealers for compared to most of the others mentioned here. I’ll be happy to take care of it if you want to bring it back here..     Sherm

Viewing 6 posts - 1 through 6 (of 6 total)

Skip to toolbar