[wardt61]

You will load it on to your unit and once it has loaded you can remove that card.

[wardt61]

Thanks for all the responses on this matter.

[wardt61]

I do not need to make my boat look like a wake board boat so I can blend in with them like you have to on the West Coast. Now 20s on the other hand would be a different story except for the great pot holes in Texas.

[wardt61]

BCBI will enjoy it once it is delivered. I am looking forward to being able to see the build process and the boat taking shape.

[wardt61]

Mike- It is nice to now be officially part of the family after taking delivery of the boat yesterday. Now if we can get a break in this rain so I can get some pics of it. Seem like as soon as I try to get the cover off it starts to rain again.Once again thanks for all your help and of course PAs help. Dont want to give him too much credit or William will have to put a bigger door into the shop at Bowden for PAs big head to fit in.

[wardt61]

You know I will be calling you for your assitance in the set up once I have it broken in. Im ready to see what it will do with the PA special on it.

[wardt61]

Highway- You can not be more correct about Mike Lott, Bowden Marine and of course PA. I recently took delivery of my new Cougar AE at Bowden and was very happy. William will go out of his way to make sure everything is correct the first time. Enjoy your new PII.

[wardt61]

Replacement I take it would mean replacing the entire seat am I correct. If that is that case I might just leave it the way it is.

[wardt61]

The boat is about a month old, and it was a siple mistake of the person trying to open the seat and not being familar with the process. I was not looking for it to be covered under warranty as it was not a defect with the product, more a defect with the individuals brain at the time.

[wardt61]

The only trade I would be willing to accept is a 27 Fury as I am currently sitting on a couple of props and need to move this 27 Tempest.

[wardt61]

Boat is sold and about to be on its way to AR. Thanks BillLast edited by wardt61 on May 30th, 2013, 2:01 pm, edited 1 time in total.

[wardt61]

Mike- Actually the angle of the picture is a little deceiving, it will set below the jackplate. I was not sure if there would be any issues with placing it in that spot on the transom.

[wardt61]

John- Is it possible to post of picture of that install?

[wardt61]

John- Thanks for the pictures, I had looked at that spot but was not sure if it would work or not. Now I know it will with the exception of it being an area of thin glass.

[wardt61]

Check with Jasper Outboard, they are located on HWY 96 in Jasper.

[Author]

Posts