Owner's Board

17SabreFTD

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 16 total)
  • Author
    Posts
  • #381148

    17SabreFTD
    Participant

    sent you a pm

    #286342

    17SabreFTD
    Participant

    Well its ordered, gonna let the boys in Arkansas decide whats best

    #286061

    17SabreFTD
    Participant

    I just ordered a new boat and requested carpet instead of gatorbak, dealer said it shouldnt be an issue. He said BCB went to these in part because of some species of mussel that was becoming a problem in some parts of the country. Aparently they can attach to the carpet and there is enough moisture for them to stay alive for some time, they can then be transferred to other lakes and rivers.

    #284851

    17SabreFTD
    Participant

    good thing i ordered a yami

    #283107

    17SabreFTD
    Participant

    i would think a 23 tempest. im running a 24 tempest with a 175 sho, 1/2 tank of fuel, average load with 180# driver and the rpms are right at 6000 (sabre ftd)

    #347199

    17SabreFTD
    Participant

    i look foward to hearing how the 150 4 stroke performs. i suspect youll be very happy!

    #346133

    17SabreFTD
    Participant

    Not sure about 8 footers but Ive got 3 that are 76 (1 of them may be 711 I cant recall) that fit on the passenger side with the organizer installed. A dual console would probably be more difficult no matter the length of the rod

    #319335

    17SabreFTD
    Participant

    I agree 100%, and very knowledgeable too

    #395991

    17SabreFTD
    Participant

    In the same place the rear tiedown straps connect

    #388612

    17SabreFTD
    Participant

    They should really start charging admission to some of these boats ramps, they are a comic show a lot of times. I was thoroughly entertained at Beeswax a couple of weeks ago…..somewhere there is a Ranger with gouges in the trailer fender from the prop, (someone forgot to take the passenger side strap loose) LOL

    #277316

    17SabreFTD
    Participant

    Got to move up to 9s to get the covers

    #459494

    17SabreFTD
    Participant

    THANKS

    #450813

    17SabreFTD
    Participant

    Ok, not sure what TM you have but heres what I went with……. I mounted a 4″ cube light (40 watt spot pattern from Black Oak LED) on the port side of my tm bracket. Ive got a motor guide x5I and drilled the hole in the “O” in motor guide sticker. Then I used a 30 amp relay that is “switched” through the red bass on my accessory panel and power is supplied from my cig lighter( spliced in ) So in short, press red bass switch on accessory panel and it energizes relay that puts power to the spot light on front of tm bracket and lights the world up for navigation at night. No interference between light and tm. Not sure how to post pics but have no doubt that you can run at night with this setup and have good vision.

    #679495

    17SabreFTD
    Participant

    Smith Lake in Cullman??

    just sayin…

    #686227

    17SabreFTD
    Participant

    BCB, Where does the 203 Hybrid fit in that sequence?

Viewing 15 posts - 1 through 15 (of 16 total)

Skip to toolbar