Bill you might want to call me sometime I can give some insight on some things I might would do different on the rigging. I will list them here and see what BCB thinks.#1 just get a smart craft guage and dont worry about all the rest of the guages. #2 flush mount the GPS if you are going with the Lowrance set it up so the guages show up on the screen. #3 flush mount the Marine Radio, they make the kind that can be flush mounted now. #4 Since you will be running in the bay more often than me, get the 25″ shaft and a hydro jackplate. #5 Maybe hydro trim tabs #6 Go ahead and get a foot control TM, I talked with the MK rep and he said they see not difference in corrosion on the black vs white ones, i am still not used to the hand control and will be switching mine out soon. In this pic maybe you can see what I am talking about, my smartcraft is between the sterring wheel and gear shift, dont put any guages except for gas and batt those are right of shifter, also see if they could move the trim guage to that same location. I dont see the need for RPM, speed or PSI since they all show on the SC. Flush mount the GPS where the guages are now, if you are getting the CD player I might would see if it can be mounted flush on the side of the console, or I dont know if you can do the console without the glove box or not but I would and mount the radio there. There is storeage under the leaning post for stuff you might would keep in the glove box. Hope that helps a little, I will shoot you a IM on BBC with my phone number!
