Owner's Board

cyiworkmore

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 38 total)
  • Author
    Posts
  • #323225

    cyiworkmore
    Participant

    thanks for the pictures…i was wondering how it would look….the problem i have is being able to turn it around enough to see it from the front deck…and with it mounted on the side i dont think ill be able to see it good from there…but thanks again for all the help…

    #324487

    cyiworkmore
    Participant

    question? does everyone that buy a new bass cat get this treatment?

    #369237

    cyiworkmore
    Participant

    i like the tool holder…they should make that to sell..id buy one…i just put something like that in my 09 PII…there in nothing like that on the PII model…let me know if anyone can purchase it.

    #356852

    cyiworkmore
    Participant

    im mountin mine on the right side/drivers side,cause i have a ladder on the left side…not sure it matters..

    #443250

    cyiworkmore
    Participant

    i have a 09 PII with a opt. on it…and with me and a tournment load i have seen 74.5…and that is straight out of the box with no adjustments.and with a two guys and full load it will go 71..you do have to drive them a little at those speeds but not bad.

    #302199

    cyiworkmore
    Participant

    go with the winch..cant go wrong!

    #423885

    cyiworkmore
    Participant

    i was just about to post something when i read this…i have a 09 P2 that i purchased in late 2009. ive only been running it for 7 months..and like most that own these boats i baby it and wash it regular…i noticed the other day that i had stress cracks in the top cap near the transom running between the live well pump outs holes and the rub rail…what do i do?

    #423645

    cyiworkmore
    Participant

    i do have a hot foot..they checked that and said it wasnt the problem…i is something with the motor..i can hit a trim switch and you can hear it try and idle down..but it will stay idling too high..i can turn it off and crank it back up and it will idle fine til the next time.

    #423671

    cyiworkmore
    Participant

    i dont think i worded this correctly…the road grime and dirt is on the console behind the windshield….you can see it thru the lite smoked windshield..but the way the windshield fits to the console it is too tight to get a towel or hand in there to get it out…the only way i see to get it out is take the windshield off everytime it happens.

    #328478

    cyiworkmore
    Participant

    i have the exact boat,colors and all…mine is a 09…what is yours running with that 26 fury? i have a 26 tempest and can get about 74 mph with me and a tournament load. oh yea…bad @#$ pictures!

    #375758

    cyiworkmore
    Participant

    im from north la. also….i went there in 96. it was off the hook way back then..which way did you go? im wanting to go back soon.

    #351019

    cyiworkmore
    Participant

    can you send before and after photos? i have a 09 PII and id like to see it done.

    #404318

    cyiworkmore
    Participant

    i upgraded my units that came in my PII.. 798 in the dash and 788 in the front…i went with the 798 in the dash because of two reasons, one it fit where the stock one was and the other was the cost..i love it…the only thing i might change later is the front…i wish i would have went with a 798 there too…not sure how good it would work on the front…the 898 and 998 are very nice too..cant go wrong with any of them.

    #450017

    cyiworkmore
    Participant

    i just left my dealer and they said they would handle it…

    #446121

    cyiworkmore
    Participant

    thanks for the help..im sure my dealer will help with everything..its just that time of year with boat shows and such that they can get pretty busy.

Viewing 15 posts - 1 through 15 (of 38 total)

Skip to toolbar