Owner's Board

meP2too

Forum Replies Created

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #363648

    meP2too
    Participant

    Check with the manufacturer, they may require a minimum of 10amps. I know Optimas do.

    #272122

    meP2too
    Participant

    I have a question why in the world would BCB let a trailer off their grounds without the insert that covers the steel support on each side of the main roller…..You sell them for $15.00. It cost me $400.00 to repair my keel when I loaded off center and ran my new P2 between the rollers. This occurred on my fourth loading of the boat. I have the inserts now. Still practicing on the loading of this boat. Some other posts have helped alot. Keeping the upper 4 to 6 inches of the outer bunks dry help center the boat.

    #377472

    meP2too
    Participant

    your charger for optima batteries MUST put out 10 amps min. for each battery

    #256098

    meP2too
    Participant

    you need to have a local electronics shop or maybe yourself check the software in both units. they could be operating on different versions which will cause issues. you can download upgrades from lowrance.

    #422598

    meP2too
    Participant

    Ill play

    #307526

    meP2too
    Participant

    tnsabre do you have any trouble putting the boat on the trailer?

    #343701

    meP2too
    Participant

    From what I have heard Hummingbird owns the patent.

    #277812

    meP2too
    Participant

    pictures emailed to all inquiries let me know they are not received. Last edited by meP2too on April 15th, 2014, 1:52 am, edited 2 times in total.

    #277813

    meP2too
    Participant

    thomasgibbs wrote:Please send picturesplease send me your email

    #277658

    meP2too
    Participant

    I am selling a Pantera 2.Which is basically the same boat. The only difference is the raised front deck and the lack of side rails on the P2.

Viewing 10 posts - 1 through 10 (of 10 total)

Skip to toolbar