[mrbraq]

Thats right. 3rd and 4th time on the trailerSent from my SM-G950U using Tapatalk

[mrbraq]

Here are a couple moreSent from my SM-G950U using Tapatalk

[mrbraq]

Midnight Rider wrote:Have you missed the roller trying to load at any time? Or had the trailer too deep when loading? Assuming you load with the bow eye up against the roller and then tighten it down really tight?Not that Im aware. Are you thinking it was dinged and is now spreading?Sent from my SM-G950U using Tapatalk

[mrbraq]

My new Sabre came with a Precision MK330PCSent from my SM-G950U using Tapatalk

[mrbraq]

Great to hear. I spent hours picking colors only to change everything after seeing the color chips in person.Sent from my SM-G950U using Tapatalk

[mrbraq]

Having a Sabre with only one cup holder up front, I’d love to see a fold down seat design with those 2 cupholders when down as an option.

Sent from my SM-G950U using Tapatalk

[mrbraq]

I’ve trolled in less than 2 feet

Sent from my SM-G950U using Tapatalk

[mrbraq]

Sherm will help you if you reach out to him. Great guy.

Sent from my SM-G950U using Tapatalk

[mrbraq]

I do. Should I buy the same brand replacement then? And how would I determine if the roller is too tight or too loose?

Sent from my SM-G950U using Tapatalk

[mrbraq]

With all due respect, I dont want this thread to turn into how I’m loading my boat. I just want a recommendation on what to do about the roller.

Sent from my SM-G950U using Tapatalk

[mrbraq]

Redngoo wrote:
I would buy the bow roller bcb sells and then if it fails you can eliminate the roller as the issue. I rotate my bow roller peroidically because of wear on the roller. When i rotate 360 degrees. I buy a new one from bcb. As bcb stated if thats a stolz they seem to be a harder compound

Didnt realize this much roller wear should be expected. I’ll buy a new one and likely start using a towel/tshirt for long trips.

Sent from my SM-G950U using Tapatalk

[mrbraq]

Bass Cat Boats wrote:You can loosen the bolt and twist the bow roller for more life.

I think we’re both asking if it *should* spin?

Sent from my SM-G950U using Tapatalk

[mrbraq]

m0ssie wrote:Mine fits very tight between the metal arms just about having to be driven in with a rubber mallet. I bought a new one and shaved 1/16 off each side, which allows me to at least rotate it by hand to extend the life of it.

Any tricks to installing it? Was hoping I can lift the bow with some weight in the back and slide it in. Shaving would take more time and complicate the install. Didnt expect that.

Sent from my SM-G950U using Tapatalk

[mrbraq]

Getting cold here. This may have to be a Spring project. Thanks guys

Sent from my SM-G950U using Tapatalk

[mrbraq]

Sabre

 

 

 

Sent from my SM-G950U using Tapatalk

[Author]

Posts