[boilerfishin]

We are practicing patience and they say its a virtue. Hopefully, Sherm will soon be receiving a new PII. If you see a beautiful silver and gray PII on Facebook, it should be ours.

[boilerfishin]

Sherm may still have some of the plates because the newer PIIs come with the new console.

[boilerfishin]

You need to call Sherm. I was able to get a lockable glove box.

[boilerfishin]

Fly,More important question….Did that contraption hanging off your line catch any fish and do you have a sore right arm from throwing it?

[boilerfishin]

Congrats Gary!!!! Sure is a good looking boat and kind of familiar. I wished I had a garage as large as yours.

[boilerfishin]

Make sure when you order numbers, you know the complete dimensions of the numbers. If you add shadowing, etc., it can add to the overall height of the number. For example, a 3″ number with bold outline and shadowing can totally measure over 4″ in height.

[boilerfishin]

The wait is the worst…….but before you know it, youll be picking it up.

[boilerfishin]

Flyswatter wrote:Kent, with that setup Id be all over a 24 Fury prop. Especially, the smaller water you fish. Fury props are pop, lock and get out of the hole wheels that will throw you in the back of the seat IMHO.I have a 24 Fury on a 2012 PII and the hole shot is great. Top speed for me is around 68 mph, but Im still a little new to these boats.

[boilerfishin]

Congrats on your retirement. I hope to be about 10 years away.

[boilerfishin]

On the front page of the BassCat website is a YouTube link. Scroll down and youll see the livewell link.

[boilerfishin]

The only other wax I have used was the Maguires Wax and I feel the ProTec wax is much better and last longer on the boat.

[boilerfishin]

Are you leaving in your cooler drain plug? We leave our plug out and havent had any problems.

[boilerfishin]

The only help I can find for you is USABassin has a co-ed division in Indiana and Kentucky.

[boilerfishin]

I have the exact same problem. When the key is first energized, all readings come up on the NexSysLink gauge. When the engine is started, the gauge shows all the symbols as stated above. I was just figuring the starting of the motor caused a reset of the gauges.

BCB, you state the touch pad is the problem, but I’ve never had any issues with the workings of the touch pad. I’m a little confused.

My memory is coming back to me. The only error I see is with the water temperature. Below is a picture of the error. The “broken link” symbols appear first, then the question marks. Within about 15 seconds, all the readings come back to normal.

 

[boilerfishin]

I like BBS after each use, Collinite wax, and Lucas Slick Mist for the cowling.

[Author]

Posts