[irbf]

I used large ty-wraps to attach them to steering cylinder in front of engine. Just dont get them too tight. Just tight enough to clear splashwell.

[irbf]

It is available at West Marine, but about $20 a bottloe.

[irbf]

Can you do both?

[irbf]

Mercury recommends 950CCA or better.

[irbf]

If you are wanting to use Hummingbird units with Lowrance transducers, there is an adapter Motorguide P/N 8M4001962 which will enable the 2D signal to come from the glassed-in Lowrance transducer. then the SI/DI  to function from an external transducer at slow speed.  Hope this helps.

[irbf]

thanks everyone for the replies.  I’ll examine the buss bar more closely as I just checked with ohmmeter.

[irbf]

I would check with your state insurance board.  That doesn’t sound right.

 

[irbf]

Post on Bass Boat Central’s Mercury 3.0L board and will get a quicker answer.

 

[irbf]

I have a 2008 Puma with 250XS running a 26″ 4 blade Trophy.  Does very well on everything except loading on trailer.  Highest speed has been 75 which is plenty for me.  Running Bob’s hydraulic plate.

[Author]

Posts